•  Quickest Ribbon fiber fusion splicer
  •  Fast splicing time 11sec./tube heating time 18sec
  •  Self cladding alignemnt withmelting surface tension
  •  Upto 12 fiber splicing
  •  Absolute Robustness
  • Real-time arc discharge control by analyzing the arc’s brightness intensity.
  • Automatic cleaver blade management by wireless communication data connectivity when the splicer judges the blade is worn.
  • Wireless link to ribbon fiber stripper to change settings to adequate one according to the ribbon fiber type to be spliced
  • Automated open-close wind protector and heater
  • Work tray with large capacity storage built in the carrying case

 

KEY FEATURES
    Standard Package:
    •  Fusion splicer 88R
    •  AC adapter ADC-20
    •  AC power cord
    •  Battery Pack 
    • Carrying case
    •  Electrodes ELCT2-16B
    •  Hexagonal Wrench
    •  V Groove cleaning brush
    •  Instruction manual CD
    •  Quick reference guide
    •  Alcohol pot
    •  Fiber holder
    •  Cleaver CT50
    •  Ribbon stripper RS03 and battery pack, adapetr, power cord, blade cleaning brush.
    •  USB cable
Over view
    •  Applicable fibers : Single / SMF(G.652/657), MMF(G.651), DSF(G.653), NZDSF(G.655)
    •  Cladding dia./ Sheath dia.: 80-150μm / 100- 3000um
    •  Cleave length: 10mm with sheath clamp
    •  Splice mode / heating mode : Total 100 splice modes / 30 heating modes
    •  Typical splice loss : 0.05dB (SM), 0.02dB(MM), 0.08dB(DS) and 0.08dB(NZDS)
    •  Splice time :Typical 11sec
    •  Tube heating time : Typical 13sec
    •  Electrode life : 1500 splices
    •  Splice result storage: 20,000 splices
    •  Splice / Heat mode: 100/30
    •  Viewing methods / magnification : 5” color LCD. 20X magnification for 12 fiber and 60x for SMF
    •  Applicable protection sleeve : 60mm, 40mm and Fujikura micro sleeves
    •  No. of splice / heating per battery full charge : Typical 165 cycles
    •  Electrode life : 5000 splices
    •  Operating condition : Altitude : 0 to 3,700m above sea level, Wind : 15m/sec, Temperature : -10 to 50deg C, Hμmidity : 0 to 95%RH, non-dew
    •  Automatic features : Splice mode select by fiber analysis, Discharge powe rcalibration, Wind protector, heater lid, Heater clamp

     

Post Your Requirement

0%
0%