29 Jul 2019

Parker Legris End Cap

Parker Legris End Cap

End Caps for HDPE ducts

To keep Macro plb Duct networks free of debris, seal the system with Push-Fit End Caps. With the same functionality as the Push-Fit Connectors, installation simply involves pushing the plb Duct into the End Cap.

Push-Fit Macro plb Duct End caps operate at 15 BAR (218 psi) with a maximum permissible leakage rate of 1cc/min. This is equivalent to 1 bubble every 3 seconds. Higher pressures have been used in the field with no increase in leakage rate. Quick Burst rating is 25 BARS (363 psi).

KEY FEATURES:

  • Enable to close and protect circuits
  • Transparency
  • Patented ridged design for unsurpassed shock resistance
  • Compact design and intuitive installation
  • Tried-and-tested connection technology to ensure capability to expand network
  • Perfect sealing IP68: full protection against particle ingress
  • UL94 V-2: flame resistance for indoor installation

Available from 7mm to 14mm. Also 16mm available on request.

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
29 Jul 2019

Parker Legris Fiber Optic Micro Tube Connector

Parker Legris Fiber Optic Micro Tube Connector

Equal and Unequal Tube to Tube Connector

To Connect Ducts / Tubes in cable blowing works.

KEY FEATURES:

  • Transparency
  • Patented ridged design for unsurpassed shock resistance
  • No protection cap necessary
  • 1 connector for DB and DI tubing
  • Compact design and intuitive installation
  • Tried-and-tested connection technology to ensure capability to expand network
  • Perfect sealing IP68: full protection against particle ingress
  • UL94 V-2: flame resistance for indoor installation

Available from 7mm to 14mm.

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
29 Jul 2019

Parker Legris Fiber Optic Micro Tube Connector With Safety Clip

Parker Legris Fiber Optic Micro Tube Connector With Safety Clip

Equal and Unequal Tube to Tube Connector With Red Tamper Proof Safety Clip

To Connect Ducts / Tubes in cable blowing works. Preassembled safety clip prevents risk of accidental disconnection

KEY FEATURES:

  • Transparency
  • Patented ridged design for unsurpassed shock resistance
  • No protection cap necessary
  • 1 connector for DB and DI tubing
  • Compact design and intuitive installation
  • Tried-and-tested connection technology to ensure capability to expand network
  • Perfect sealing IP68: full protection against particle ingress
  • UL94 V-2: flame resistance for indoor installation

Available from 7mm to 14mm.

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
29 Jul 2019

Cable Guide and Support Roller

Cable Guide and Support Roller

Cable Guide support or V shape cable rollers are used while drawing fiber cable or telecom/ electrical cable from the drum. This roller guides the cable into desired path without damaging its sheath and also reduce the friction on surface and smoothly floats the cable. Useful to pull the cables around the difficult corner or bends.

Powder coated for rust prevention.

Size – 100 x 35 x 35 cm

Weight – 20 Kg

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
29 Jul 2019

Triple Corner Roller and Manhole Roller

Triple Corner Roller and Manhole Roller

Triple corner rollers or Manhole Cable Rollers are used while drawing fiber cable or telecom/ electrical cable from the drum. This roller guides the cable into desired path without damaging its sheath and also reduce the friction on surface and smoothly floats the cable. Useful to pull the cables around the difficult corner or bends.

Powder coated for rust prevention.

Size – 30 x 22 x 27 cm

Weight – 4.5 Kg

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
29 Jul 2019

Single Roller and Straight Cable Roller

Single Roller and Straight Cable Roller

Single Cable guide rollers or Straight Cable Rollers are used while drawing fiber cable or telecom/ electrical cable from the drum. This roller guides the cable into desired path without damaging its sheath and also reduce the friction on surface and smoothly floats the cable.

Powder coated for rust prevention.

Size – 30 x 22 x 27 cm

Weight – 4.5 Kg

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
29 Jul 2019

Cable Drum Rotator

Cable Drum Rotator

Cable Drum rotators used to mount the cable drum winded with cables in a position so as to load the cables into duct pipes and rotatable stand makes it to spin free manner and makes the installation easier. Since the rotators are come in pairs, cable drum of any diameter can be used. Fabricated with High quality steel and maintenance free ball bearings, can withstand weight upto 1500 kgs.

Powder coated for rust prevention. 

 Size – 100 x 35 x 40 cm

 Weight – 70 Kgs

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
29 Jul 2019

Cable Drum Decoiler

Cable Drum Decoiler

Cable drum decoilers are used to unwind and decoil cables from the drums. Our decoilers are designed in such a way to ensure faster and easier operation of unwinding. Made of hardened metal to withstand upto 1000 Kgs.

Fabricated of Rust proof Galvanized Steel.

Useful in cable blowing applications with minimum workforce.

Size – 160 x 160 x 40 cm

Weight – 70 Kgs

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
29 Jul 2019

Duct Chamfering Tool

Duct Chamfering Tool

Our Gowin duct chamfering tool is made of Aluminium with strong grip, easy to handle.

Useful in correcting the circular edges of duct pipes in order to align the duct properly with couplers.

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
29 Jul 2019

Pushfit coupler

Pushfit coupler

Push fit couplers of size 32 mm made of high density Polyethyelene virgin grade is very easy to fix and also with stands high pressure air of 14 Kg bar is very safe to use at working pressure @ 11 KG/CM²  for optical fiber cable blowing conduit pipe joints .

Features

  • No manual threading or adhesive required
  • No need to dismantle
  • Just push press the pipe in the center of coupler.
  • Coupler can be fitted in a minute
  • The proven sturdy and robust design is rated for 14 Kg/cm2 tested pressure.
  • Recommended Pressure   @ 11 KG/CM²
  • Provides perfect leak-proof joint ensuring safer and faster DIT and cable blowing operation.
  • No Metal part used.

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next