24 Jul 2019

Aluminium Split Coupler

Aluminium Split Coupler

The Aluminium Split Couplers used at Optical Fiber Cable blowing operations to connect the underground laid OFC duct to couple with already loaded ducts with cable blowing machine at ground level or at convenient location.

Our Split couplers are made of high grade virgin aluminium , which  can withstand fungus attacks and corrosion free. It’s typical design is very easy to use at work sites, very simple to fix and remove at trench depths or man holes , no spanners required, just small lever is enough to fix.

Avaialble in size 40 mm, 50mm, 32mm and can be customized

Advantages of our Split Coupler:

  1. Alumnium Couplerwith Less weight
  2. Anti fungal coating
  3. Easy to remove and fix
  4. Hanging Bolts and Nuts protected from losing into trench.
  5. Hot chromed coating against rust.

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
24 Jul 2019

Rubber Top Chain

Rubber Top Chain

Rubber top chain size RT-06 for pushing the fiber cable between top and bottom chains made of Nitrile rubber pads @ 65 RC shore ‘A’ ensures smooth pushing of fiber cables , it is designed so as the grip around fiber walls uniform ensures safety of fibers against any crushing . its proven safe model . Comes with exact length requirements or link numbers as per choice or in bulk 100 feet length . Connector links also part of package

Over view

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
24 Jul 2019

Traceable Duct Rodder

Traceable Duct Rodder

Duct Rodder with copper head with the fiber allows the user to map and locate the blocks, without the need of unwanted digging and repairs  and thus reduces cost and time

Fiber Glass duct rodders or push rodders and commonly called python rod by its nature passing through underground ducts . It is very convenient to pull the cables, wires inside the duct , also it can be used to locate the duct block or damage portion identifications . It has high safety aspects to use underground applications because of its non conductivity of electricity, sets a major safety to site workers .

GOWIN FRP Rodder is a professional heavy duty cable pulling device based on Composite fiberglass rod. Frame is galvanized/ powder coated to make it Rust proof. Duct Rodder of size above 9mm provided with wheels & integral brake. Attached with M12 threaded rod ends at both ends.

GOWIN Duct Rodder is ideal for installation of optical fiber telecom cables in buried / underground HDPE ducts up to 300 meters in metro and congested city environments.

GOWIN duct rodder is also the most widely used equipment in OFC maintenance & where cable blowing method is not feasible.

FEATURES:

  • Made of long lasting fine quality material which can withstand any climatic temperature
  • Compact and Easy to transport in a pickup jeep or small transport vehicles.
  • Durable, High Strength, Super Tough
  • Provided with M12 Male Rod end to allow Sonde Accessories to be attached (Optional)
  • Won’t break down easily like cheaper brands when exposed to hot climatic condition.

Over view

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
24 Jul 2019

FRP Duct Rodder

FRP Duct Rodder

Fiber Glass duct rodders or push rodders and commonly called python rod by its nature passing through underground ducts . It is very convenient to pull the cables, wires inside the duct , also it can be used to locate the duct block or damage portion identifications . It has high safety aspects to use underground applications because of its non conductivity of electricity, sets a major safety to site workers .

GOWIN FRP Rodder is a professional heavy duty cable pulling device based on Composite fiberglass rod. Frame is galvanized/ powder coated to make it Rust proof. Duct Rodder of size above 9mm provided with wheels & integral brake. Attached with M12 threaded rod ends at both ends.

GOWIN Duct Rodder is ideal for installation of optical fiber telecom cables in buried / underground HDPE ducts up to 300 meters in metro and congested city environments.

GOWIN duct rodder is also the most widely used equipment in OFC maintenance & where cable blowing method is not feasible.

FEATURES:

  • Made of long lasting fine quality material which can withstand any climatic temperature
  • Compact and Easy to transport in a pickup jeep or small transport vehicles.
  • Durable, High Strength, Super Tough
  • Provided with M12 Male Rod end to allow Sonde Accessories to be attached (Optional)
  • Won’t break down easily like cheaper brands when exposed to hot climatic condition.

Over view

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
24 Jul 2019

Gowin 1020 Pneumatic Cable Blowing Machine

Gowin 1020 Pneumatic Fiber Optic Cable Blowing Machine

Optical fiber cable blowing machine can blow OFC of size 9 mm to 16 mm dia of any configuration whether armored or unarmored  cable into the ducts of size 25 to 63 mm. The machine is powered by 835 RPM High power ModecMT20 air motor. Anodized Aluminium air chamber unit to prevent from fungus and corrosion.

The blowing machine requires no dedicated operator to run the machine because its very simple to operate  with semi skilled operator and very easy to shift from one work site to other since machine weighs only less than 38 kg. Also assembling at work site takes few minutes, saves lot of time and fuel, with low maintenance.

The machine is provided with all accessories required for cable blowing like Rubber ‘U’ seals , split couplers , Filter lubrication system, Duct cutter, Allen Key set, Fiber Hammer, Spare bolts and nuts.

Over view

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
23 Jul 2019

Gowin Microjet Cable Blowing Machine

Gowin Microjet Cable Blowing Machine

Very Compact and light weight machine for blowing cables of size above 0.8 mm to 4 mm into the ducts of size 7mm to 20mm.

Gowin Microjet can be powered by Pneumatic or Electric drive along with by venting high pressure air stream into ducts thus the fiber cable floats inside the duct, reduces the friction and transports the fiber cable inside the micro ducts

The machine can blow fiber cables at an average speed 100 to 125 meters per minute.

Machine fabricated of high grade Aluminium for Non corrosive, rust free and long lasting use

Air compressor of capacity 20 to 60 CFM for micro ducts up to 16 mm needed to operate this equipment

Key Features of our Gowin Microjet Cable Blowing Machine

  1. Premium quality rust free and corrosion free aluminium die casting pushing unit
  2. Can be driven by electric drive unit
  3. Very compact and light weight

Over view

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
23 Jul 2019

Gowin Minijet Pneumatic Cable Blowing Machine

Gowin Minijet Pneumatic Cable Blowing Machine

GOWIN’ s Minijet Micro fiber cable blowing machine powered by Pneumatic air motor is a new series of  equipment in cable blowing designed to meet the installation of Micro optical fiber cables in pre installed ducts at quick intervals safely.

GOWIN’s  Minijet cable blowing machine can blow micro fiber cables of size 3mm to 14 mm into micro ducts from 10mm to 40 mm. The machine is powered by premium quality 835 RPM Pneumatic motor

This new series micro fiber cable blowing machine GOWIN MINIJET installs micro fiber cable into micro ducts by pneumatic motor along with high pressure air stream into ducts. Thus the fiber cable floats inside the duct reduces the friction and transports the fiber cable inside the micro ducts at an average speed 100 to 125 meters per minute reaches the target distance.

Air compressor of capacity 50 to 60 CFM for micro ducts up to 20 mm and pressure rating of 300 -350 CFM up to 40 mm duct needed to operate this equipment.

Key Features of our Gowin Minijet Cable Blowing Machine

  1. Premium quality rust free and corrosion free aluminium die casting pushing unit
  2. 835 RPM pneumatic motor for speed installation of micro fiber.
  3. High quality V groove belt with longer life and better performance enables smooth flow of cables
  4. Hardened, heat treated and surface coated accessories used.
  5. Air Chamber made of HE30 grade Aluminium gives longer life.
  6. Space saving and compact machine

We provide machine with all necessary inserts and tools. We can assure our best services and support on our machines. Please contact us for further details.

Over view

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
23 Jul 2019

Gowin Minijet Hydraulic Cable Blowing Machine

Gowin Minijet Hydraulic Cable Blowing Machine

GOWIN’ s Minijet Micro fiber cable blowing machine powered by hydraulic power pack is a new series of  equipment in cable blowing designed to meet the installation of Micro optical fiber cables in pre installed ducts at quick intervals safely.

GOWIN’s  Minijet cable blowing machine can blow micro fiber cables of size 3mm to 14 mm into micro ducts from 10mm to 40 mm. The machine is powered by Hydraulic power pack fitted with 5.5 Hp Honda petrol engine.

This new series micro fiber cable blowing machine GOWIN MINIJET installs micro fiber cable into micro ducts by Hydraulic motor along with high pressure air stream into ducts. Thus the fiber cable floats inside the duct reduces the friction and transports the fiber cable inside the micro ducts at an average speed 100 to 125 meters per minute reaches the target distance.

Air compressor of capacity 50 to 60 CFM for micro ducts up to 20 mm and pressure rating of 300 -350 CFM up to 40 mm duct needed to operate this equipment.

Key Features of our Gowin Minijet Cable Blowing Machine

  1. Premium quality rust free and corrosion free aluminium die casting pushing unit
  2. 5.5 HP Honda engine used in power pack for speed installation of micro fiber.
  3. Aluminium Hydraulic oil tank used in power pack enabling self cooling of oil while in circulation.
  4.  High quality V groove belt with longer life and better performance enables smooth flow of cables
  5. Hardened, heat treated and surface coated accessories used.
  6. Branded Bosch Rexroth Hydraulic pump for Hydraulic Powerpack
  7. Safety Valves with option to shut down in critical situations.
  8. Air Chamber made of HE30 grade Aluminium gives longer life.

Over view

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
22 Jul 2019

Gowin Power Pack with Diesel engine

Gowin Power Pack with Diesel engine

GOWIN hydraulic Power pack fitted with 11HP Kohler LD440 Diesel engine suitable for cable blowing and Various industrial requirements.

KEY FEATURES

  • High Capacity 11HP Kohler LD440 Diesel engine fitted in Powerpack.
  • High quality rust free and corrosion free powder coated
  • Aluminium Hydraulic oil tank enabling self cooling of oil while in circulation.
  • Hardened, heat treated and surface coated accessories used
  • Safety Valves in Power pack for longer hassle free pumping of oil with option to shutdown in critical situations
  • Hydraulic Hose with QRC coupling for quick connect and removal in both blowing unit and powerpack.

Over view

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
22 Jul 2019

Gowin Power Pack with Petrol engine

Gowin Power Pack with Petrol engine

GOWIN hydraulic Power pack fitted with Honda GX270 petrol engine suitable for cable blowing and Various industrial requirements.

KEY FEATURES

  • High Capacity 9HP Honda GX270 engine fitted in Powerpack.
  • High quality rust free and corrosion free powder coated
  • Aluminium Hydraulic oil tank enabling self cooling of oil while in circulation.
  • Hardened, heat treated and surface coated accessories used
  • Safety Valves in Power pack for longer hassle free pumping of oil with option to shutdown in critical situations
  • Hydraulic Hose with QRC coupling for quick connect and removal in both blowing unit and powerpack.

Over view

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
22 Jul 2019

GOWIN 1025 Cable Blowing Machine wheel Type

GOWIN 1025 Cable Blowing Machine wheel Type

GOWIN 1025 hyrdaulic model cable blowing machine suitable for cross country and long haul networks fiber cable installations where continuous fiber laying works, a best designed machine which runs on hydraulic power, a heavy duty model hydraulic power pack fitted with 11 HP Lombardini Diesel Engine or 9HP HONDA GX 270 petrol engine can run nonstop making Fiber cable installations in long haul networks easy.

Jetting unit made of high grade aluminum alloy, ensures vibration free smooth installation of fiber cable into ducts along with venting high stream air, which reduces the fiber cable- duct friction ratio , transports the fiber inside ducts at target locations.

KEY FEATURES

  1. Premium quality rust free Aluminium Fabricated machine.
  2. High capacity 9 HP Honda Petrol Engine or 11 HP Kohler diesel Engine in power pack for Speedy installation of cables
  3. Aluminium Hydraulic Oil tank which provides Self cooling of oil while in circulation
  4. Anodized Aluminium air chamber unit to prevent from fungus and corrosion.
  5. Branded Bosch Rexroth Hydraulic pump for Hydraulic Powerpack
  6. High quality steel, hardened rails which applies uniform pressure while cable pushing
  7. Hardened, heat treated and surface coated accessories used.
  8. High quality Rubber chain which gives longer life and better performance
  9. Machine is provided with all the accessories like Duct cutter, Allen Key, Rubber U Seals.
  10. In Wheel type machines, there is a option for tilting the machine from “0” degree to “45” degree for ease of usage.

Our machines have record of pushing about 3000 kms of cable without any service issue. We have a very good feedback from all our overseas customers.

We can assure our best services and support on our machines. Please contact us for further details

Over view

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
22 Jul 2019

GOWIN 1025 Cable Blowing Machine Stand Type

GOWIN 1025 HYDRAULIC CABLE BLOWING MACHINE

GOWIN 1025 hyrdaulic model cable blowing machine suitable for cross country and long haul networks fiber cable installations where continuous fiber laying works , a best designed machine which runs on hydraulic power , a heavy duty model hydraulic power pack fitted with 11 HP Lombardini Diesel Engine or 9HP HONDA GX 270 petrol engine can run non stop making Fiber cable installations in long haul networks easy .

Jetting unit made of high grade aluminum alloy , ensures vibration free smooth installation of fiber cable into ducts along with venting high stream air , which reduces the fiber cable- duct friction ratio , transports the fiber inside ducts at target locations.

KEY FEATURES
  • Field adjustable mechanism to position or tilt the machine from horizontal (“0” degree ) level to “45” degree level, as per the user’s choice.
  • Built-In Digital display provides the length of the installed cable on to the duct, in digital format at 99.5% accuracy level, both in meters or yards, as per the user’s choice.
  • Digital counters with the facility to program for Reverse blow lengths.
  • Anodized Aluminium air chamber unit to prevent from fungus and corrosion.
  • The machine is supplied with all cable rubber U-seal lips from 10 mm to 24 mm diameters as standard package, to fix with various sizes easily.
  • Duct collets from 25mm, 32 mm , 40 mm and 50 mm diameters are also part of standard package any one size as per customers choise .
  • Dust-Proof covering ensures the system free from fault with longer reliability and life.
  • Rubber pad attached chain drive with spring glider in the machine ensures the fibre is installed into duct in a smoother way.

Over view

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next
22 Jul 2019

Stand Type (Petrol & Diesel)

Unite Gallery Error:

Gallery with alias: wheel_mounted not found

GOWIN 1025 HYDRAULIC CABLE BLOWING MACHINE

GOWIN 1025 hyrdaulic model cable blowing machine suitable for cross country and long haul networks fiber cable installations where continuous fiber laying works , a best designed machine which runs on hydraulic power , a heavy duty model hydraulic power pack fitted with 11 HP Lombardini Diesel Engine or 9HP HONDA GX 270 petrol engine can run non stop making Fiber cable installations in long haul networks easy .

Jetting unit made of high grade aluminum alloy , ensures vibration free smooth installation of fiber cable into ducts along with venting high stream air , which reduces the fiber cable- duct friction ratio , transports the fiber inside ducts at target locations.

KEY FEATURES
  • Field adjustable mechanism to position or tilt the machine from horizontal (“0” degree ) level to “45” degree level, as per the user’s choice.
  • Built-In Digital display provides the length of the installed cable on to the duct, in digital format at 99.5% accuracy level, both in meters or yards, as per the user’s choice.
  • Digital counters with the facility to program for Reverse blow lengths.
  • Anodized Aluminium air chamber unit to prevent from fungus and corrosion.
  • The machine is supplied with all cable rubber U-seal lips from 10 mm to 24 mm diameters as standard package, to fix with various sizes easily.
  • Duct collets from 25mm, 32 mm , 40 mm and 50 mm diameters are also part of standard package any one size as per customers choise .
  • Dust-Proof covering ensures the system free from fault with longer reliability and life.
  • Rubber pad attached chain drive with spring glider in the machine ensures the fibre is installed into duct in a smoother way.

Over view

Post Your Requirement

[]
1 Step 1
Your Nameyour full name
Contact No
Your Message
0 /
Previous
Next